Category Archives: Controls

New Product on Our Website: ASE DS-9C Roof & Gutter Deice Controller with Remote (10 Foot Cable) Precipitation Sensor

ASE DS-9C Roof & Gutter Deice Controller with Remote (10 Foot Cable) Precipitation Sensor
Item Code Description
ASE10013
DS-9C Rain/Snow Sensor Controller
ASE 60 Amp (Dual 30A @ 240VAC Control) – 120/208-240V Field Select Controller- Replaceable Remote Precipitation Sensor- 3/4 Inch conduit hub – 240V Power Pigtail (#14 Black, Red, Green) – 2 Load Pigtails (#10 AWG Yellow & #10 AWG Red)

 

New product on our website: Chromalox Heat Trace Controls. Temperature sensors for process pipe heating, Thermostats, Roof and Gutter Heat Trace Control systems & Hot Water Temperature Maintenance

New product on our website: Chromalox Heat Trace Controls. Temperature sensors for process pipe heating, Thermostats, Roof and Gutter Heat Trace Control systems & Hot Water Temperature Maintenance

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/HEAT%20TRACE%20CONTROLS.aspx

New product on our website: Chromalox SA1 Precision Insulated Themocouples. Rated to 350°F Long Term

New product on our website: Chromalox SA1 Precision Insulated Themocouples. Rated to 350°F Long Term

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/TEMPERATURE%20SENSORS/CHROMALOX%20THERMOCOUPLES/SA1.aspx

SA1 Precision Insulated Thermocouples
• Rated to 350°F Long Term
• Better than 0.3 Second Response Time

Self-Adhesive Backing, Standard 36” Length

New product on our website: Chromalox C700KU Special Purpose Thermocouple Sensor

New product on our website: Chromalox C700KU Special Purpose Thermocouple Sensor

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/TEMPERATURE%20SENSORS/CHROMALOX%20THERMOCOUPLES/C700KU.aspx

C700KU Special Purpose Thermocouple Sensor
• Features a metal transition and spring relief

New product on our website: Chromalox SSR1 Single phase, zero cross SSR power controllers

New product on our website: Chromalox SSR1 Single phase, zero cross SSR power controllers

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/POWER%20CONTROLLERS/SSR/SSR1.aspx

SSR1 Single phase, zero cross SSR power controllers

• IP20 Touch Protection Cover
• DV/DT Protection
• Third-party certifications: UL Recognized, CSA, CE

• Mercury Relay Replacement
• Electric Ovens
• Plastics Machinery
• Packaging Equipment
• Food and Beverage Processing Equipment
• Platen Heater
• Extruders
• Resistance Heating
• Contactor Replacement

New product on our website: Chromalox 6040 1/16 DIN Temperature and Process Controller

New product on our website: Chromalox 6040 1/16 DIN Temperature and Process Controller

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CHROMALOX%20ELECTRONIC%20CONTROLS/SINGLE%20AND%20DUAL%20CHANNEL/6040.aspx

6040 1/16 DIN Temperature and Process Controller
• Optional Configuration Software
• Ramping Setpoint
• Adjustable Hysteresis
• Valve Motor Drive Position
• Heater Break Alarm Function
• Remote/Dual Setpoint Options
• Security Options
• Available in 1/16 DIN
• UL, cUL, CE & CSA
• 3 Year Warranty
• Jumperless Configuration
• Auto Detected Hardware
• Process & Loop Alarms
• ModBus Communications
• Auto or Manual Tuning
• Heat/Cool Operation
• Up to 3 Outputs
• Optional 24 Vdc Transmitter Power Supply

Whether you have to manage temperature, flow, valve positioning or pressure, the Chromalox 40 Series Temperature and Process Controllers provide you with a comprehensive feature list and the flexibility to meet your most demanding process needs. Application needs change over time, but that doesn’t mean that you’ll need to change your controller. The Chromalox 40 series modular card design provides the owner with the flexibility to alter the functionality with ease. Expansion from 1 to 3 outputs, as well as communications and remote setpoint is easily accomplished and automatically recognized by the firmware. The optional ChromaWareTM configuration software allows the owner to program multiple units efficiently and store parameter settings for later use. The 40 Series Controllers are an ideal complement in both design and esthetics to its cousin, the Chromalox 50 Series Limit Controllers.

• Universal Input
• Full PID with Pre-tune, Self-tune, Manual tuning, or On-Off control. Heat only o Heat & Cool
• Auto Detected Hardware
• Process & Loop Alarms
• ModBus Communications
• Auto or Manual Tuning
• Heat/Cool Operation
• Ramping Setpoint
• Valve Motor Drive Position Option
• Heater Break Alarm Function Option
• Alarm 1 & 2 Types
• 24 VDC Output for loop power
• PC Configuration Software
• Remote Setpoint Input
• Output Configuration:
• Up to 3 possible, for control, alarm, 24 VDC transmitter power supply or retransmit of process value or Setpoint

New product on our website: Chromalox 4040 1/4 DIN Temperature and Process Controller

New product on our website: Chromalox 4040 1/4 DIN Temperature and Process Controller

http://www.morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CHROMALOX%20ELECTRONIC%20CONTROLS/SINGLE%20AND%20DUAL%20CHANNEL/4040.aspx

4040 1/4 DIN Temperature and Process Controller
• Universal Input
• Ramping Setpoint
• Adjustable Hysteresis
• Valve Motor Drive Position
• Heater Break Alarm Function
• Remote/Dual Setpoint Options
• Security Options
• Available in 1/4 DIN
• Optional Configuration Software
• UL, cUL, CE & CSA
• 3 Year Warranty
• Jumperless Configuration
• Auto Detected Hardware
• Process & Loop Alarms
• ModBus Communications
• Auto or Manual Tuning
• Heat/Cool Operation
• Up to 3 Outputs
• Optional 24 Vdc Transmitter Power Supply

Whether you have to manage temperature, flow, valve positioning or pressure, the Chromalox 40 Series Temperature and Process Controllers provide you with a comprehensive feature list and the flexibility to meet your most demanding process needs. Application needs change over time, but that doesn’t mean that you’ll need to change your controller. The Chromalox 40 series modular card design provides the owner with the flexibility to alter the functionality with ease. Expansion from 1 to 3 outputs, as well as communications and remote setpoint is easily accomplished and automatically recognized by the firmware. The optional ChromaWareTM configuration software allows the owner to program multiple units efficiently and store parameter settings for later use. The 40 Series Controllers are an ideal complement in both design and esthetics to its cousin, the Chromalox 50 Series Limit Controllers.

• Universal Input
• Full PID with Pre-tune, Self-tune, Manual tuning, or On-Off control. Heat only o Heat & Cool
• Auto Detected Hardware
• Process & Loop Alarms
• ModBus Communications
• Auto or Manual Tuning
• Heat/Cool Operation
• Ramping Setpoint
• Valve Motor Drive Position Option
• Heater Break Alarm Function Option
• Alarm 1 & 2 Types
• 24 VDC Output for loop power
• PC Configuration Software
• Remote Setpoint Input
• Output Configuration:
• Up to 3 possible, for control, alarm, 24 VDC transmitter power supply or retransmit of process value or Setpoint

New Product: Wrapon 14600 Waterline RoofGuard Cable Control

Item Code: WRAPON14600

Description:  14600 Waterline RoofGuard Cable Control

Wrap-On Co., Inc. #14600 – Optional Automatic Roof Control for Wrapon Roof and Gutter De-Icing Heating Cable. Senses temperature and water (Controls 1 Cable) – 1200 Watt capacity at 120 VAC. 10 Amps
WRAPON14600
This control is identical to the EasyHeat RS-2 and the King Electric CWR

New Product: Qmark Marley CP – Electric Infrared Heating Control Panels. 208, 240, 277, 480 & 600 volt. 40, 50, 100, 200 & 300 amps

 

For use in 208, 240, 277, 480, and 600 volt systems, with full load amps up to 40, 50, 100, 200, and 300 amps.

• CP Series Power Control Panels are factory wired for efficient installations and include terminal blocks, On-Off selector switches, power ON pilot light, and a 24 volt or 120 volt control circuit. Panels are available for use in 208, 240, 277, 480 and 600 volt systems, with amp loads up to 40, 50, 100, 200 and 300 amps (inductive load).
• NEMA 1 enclosure, UL/cUL listed and labeled control panel
• On/Off Control Switch
• Power ON Pilot Light.
• Control transformer with fused primary and secondary.

http://www.morelectricheating.com/products/MANUFACTURERS/QMARK/CP.aspx

Easyheat Commercial Grade Multi-Zone Snow Melting Controls

EasyHeat Commercial Grade Multi-Zone Snow Melting Control.

This commercial grade, multi-sensor snow melting control is capable of monitoring snow and ice accumulation in three separate zones and sending independent control signals to each zone—for example, one signal for the sidewalk, one for the driveway, and one for the gutters and downspouts.

The MSC-1 control is housed in an enclosure suitable for commercial and industrial indoor applications (NEMA 4, 4X). It features an LCD display for programming and indicator lights for operation of each zone. The control signal relays operate external contactors. The MSC-1 controller is UL Listed to US and Canadian Safety Standards.

http://www.morelectricheating.com/products/SNOW%20AND%20ICE%20MELTING/AUTOMATIC%20CONTROLS%20AND%20SENSORS/EASYHEAT%20SNOW%20CONTROLS.aspx

New Product: King Electric SnowFree PYRO De-Icing System and Accessories. Automatic control and power distribution for de-icing and snow melting.

PYRO Snow Melt/De-Icing System

The PYROBOX3/3C/5 power boxes together with the PYROCON12 controller and interface panel, offer smart and
easy control over the PYRO snow & ice melting system. It can operate up to 4 snow melting zones and one
auxillary zone, with selectable sequencing method. Typical applications include driveways, sidewalks, loading
docks, stairs, pavement and gutters. The back-lit LCD screen provides full interface and information of the
system status. The use of several zones staggering allow covering larger area for snow melting with a limited
available electrical power.

http://www.morelectricheating.com/products/SNOW%20AND%20ICE%20MELTING/AUTOMATIC%20CONTROLS%20AND%20SENSORS/PYRO.aspx

http://www.king-electric.com/PYRO.html

http://www.meitavtec.com/Product-Category-list.aspx?PrdCategory=Snow%20Melting%20Control&PrdFamily=PYRO_X%20de-icing%20system

24A01G-3 Inexpensive 240V Electric Heat Relay

WR10011

http://www.morelectricheating.com/default.aspx?page=item%20detail&itemcode=WR10011

White Rodgers Low Voltage Single Relay 1-6000W @240V with Transformer – Level-Temp allows low voltage 2-wire thermostat to control line voltage loads such as baseboard heaters

New Product Introduction: Control electric heating freeze protection cable temperature with the Easy Heat T9EA Adjustable Pipe Trace Thermostat

EASY10674

T9EA Adjustable Pipe Trace Thermostat

 
NEMA 4, 7 & 9 enclosure – 22 Amp – 15-140F Ambient Range – 10 foot cap. bulb – UL & CSA CL. I/II, Div. 1&2, Grps. B,C,D/E,F,G; Type 4 Indoor/Outdoor Hostile environments/hazardous locations – Control electric heating freeze protection cable temperature

Pipe Freeze Protection (pipe trace) controls

EasyHeat C4XC Line/Ambient Sensing 40F Fixed Temperature NEMA 4X Set-Point (1)

ETI (Environmental Technology, Inc.) Snow & Ice Melting Controls & Sensors

Mor Electric Heating is a Master Stocking Distributor for ETI. All of our salesmen are highly trained in snow melting controls. We even have one salesman here, Brian (known around here as “Heating Cable Guy”) at Ext. 7201, who has passed ETI’s certification program.

ETI SST-2 Automatic Freeze Protection Electric Thermostat. Up to 30Amp Heater Loads. On below 40F & off above 42F (2)    ETI LCD-8 Aerial Snow Melting Controller. Automatic Snow Switch. 100-240V, Configurable, Pole Mounted, Weather-resistant (2)    ETI Snow Switch Model LCD-7A Automatic Snow Melting Control. Aerial Snow Melting Controller (1)   
ETI Tracon SST-3 Adjustable Set Point Electronic Thermostat with Ground Fault Equipment Protection (2)    ETI Snow Switch Model PD Pro Automatic Snow & Ice Melting System Control for Pilot Duty Applications, 120V (1)    ETI GPT-3 Tracon Freeze Protection Thermostat with GFEP, 120-277 VAC UL / CSA (2)   
ETI Snow Switch Model GF Pro. Automatic Snow & Ice Melting System Control with Integral Ground Fault Equipment Protection (1)    ETI EUR-5A 24V Snow & Ice Melting Automatic Control Panel for Electric & Hydronic, includes RCU-3 Remote Control (5)    ETI Model SC-40C Snow/Ice Melting Satellite Contactor. Modular Snow/Ice Heater Control System (13)   
ETI Snow Switch Model APS-4C. Automatic Snow/Ice Melting System Control integral GFEP (13)    ETI Snow Switch Model APS-3C. Automatic Snow/Ice Melting System Control (5)    ETI Snow Switch Model LCD-1 Automatic Snow Melting Control. Aerial Snow Controller (2)   
ETI Snow Switch Model LCD-3 Automatic Snow Melting Control. Aerial Snow Controller. Automatic Deicing / Rain Blower Control (3)    ETI HSC-4 & HSC-5 Pavement Mount Snow Melt Control. Automatic Deicing Control Saves Energy (3)    ETI SIT-6E Pavement Mounted Snow & Ice Sensor used with any APS series or EUR–5A Control Panel (2)   
ETI CIT-1 & CIT-XTV Snow Sensor. General Purpose Snow Sensor used with any APS or EUR series control panel (4)    ETI GIT-1 Gutter Mounted Ice Sensor. Automatic Gutter Deicing Controls Operating Costs with APS–3C or APS–4C Control Panel (1)    ETI RCU Remote Control Units (RCU-2, RCU-3 & RCU-4). Flush or surface mount remote control & indication of Snow/Ice Melting Controllers (3)   
ETI LCD–1T Precipitation Sensor. Aerial Precipitation Sensor For Use With the Tekmar 362 Mixing Control Model (1)    ETI Snow Switch Models LCD-1H and LCD-3H. Minimize Hydronic Snow Melting Costs (2)    ETI ES-1 Rain/Snow Interface For Building Automation, 12-15 VDC, Separate isolated reed relays signal rain & snow (1)