EasyHeat self-regulating electric heat trace cables are now listed and certified for freeze protection from main water lines to sprinkler heads!

EasyHeat SRTrace self-regulating electric heat trace cables are now listed and certified for freeze protection from main water lines to sprinkler heads. Recent NFPA 13 changes have approved self-regulating cables for branch sprinkler systems for use for fire protection in specification projects. EasyHeat freeze protection is inexpensive to run, with virtually no maintenance needed. It’s also safer than conventional systems, since it offers a quicker response without the need for antifreeze chemicals.

See it on our website at:

https://morelectricheating.com/products/MANUFACTURERS/EASY%20HEAT/EASY%20HEAT%20SR%20SERIES/EASY%20HEAT%20SELF-REGULATING%20PIPE%20FREEZE%20PROTECTION%20HEAT%20TRACE.aspx

NO DELAYED RESPONSE AND NO CHEMICALS FOR RELIABLE, CLEANER FIRE PROTECTION.

EasyHeat’s fire protection system is ideally suited for carports, crawl spaces, non-heated attics, car washes, walk-in freezers and other unheated residential or commercial locations where branch sprinkler systems are used for fie protection. Because the system is always charged with water, there is less risk of corrosion due to trapped moisture and air. Electricity costs are minimal because EasyHeat’s self-regulating cables and temperature controls apply heat only where and when it is needed.

LESS MAINTENANCE WITH AUTOMATIC, SELF-MONITORING HEAT. EasyHeat’s fire protection system is ideally suited for residential garages, car washes, attics and crawlspaces, or any other unheated location where branch sprinkler systems are used for fie protection.Once the system is installed, there are no maintenance costs, no chemicals to buy, and no need to pay a professional to clear water lines annually. You won’t have to worry about corrosion caused by trapped moisture or chemicals that can lead to clogged sprinkler heads. And because the temperature controls only applies as much heat as needed, electricity costs are minimal.

SELF-REGULATING HEAT OUTPUT. Automatically varies heat output as needed, allowing the cable to be overlapped without creating hot spots during operation.

QUICKER RESPONSE.With dry systems, valves control water flow. As a result, water takes longer to reach the sprinklers from the source. EasyHeat products ensure that water is always running through the line and can immediately begin flowing to the area.

CLEANER FOR YOUR FACILITY.No antifreeze is needed, eliminating the possibility of chemicals leaking into drains and ground water. And if a fie does occur, no chemicals are sprayed on your facility or equipment.