Category Archives: Industrial Heaters

New Product on Our Website: Briskheat TTH Silicone IBC/Tote Tank Heaters

 
 
       
• Ideal for a wide range of indoor/outdoor caged tote tank / IBC heating applications.
• Quick heat-up time due to direct surface contact underneath plastic bladder.
• Non-invasive heat: Does not contaminate or scorch your product.
• Easy-to-use and accurate digital temperature control.
• Includes outdoor-use digital temperature control and IBC/TOTE tank heating pad.
• Easy plug-and-play connections are ready for use out of the box.
• Temperature controller available in °F or °C (see ordering options).
• Multi-stranded heating element is uniformly placed to maximize heat distribution.
• Heating element is laminated between two extra thick layers of 20mil fiberglass reinforced silicone rubber.
• Type-K thermocouple temperature sensor built-into the heating pad.
• Moisture and chemical resistant silicone rubber heating pad.
• Audible alarm.

• TTD Temperature controller range: 0°F to 175°F (0°C to 80°C)
• 1/2″ (13mm) thick foam pad
• Thermocouple: Type-K
• Maximum exposure temperature: 180°F (82°C)
• Heater power cord: silicone rubber power leads 6ft (1.8m) long with IP-67 four-pin (NEMA 6P equivalent) output receptacle
• Temperature controller power cord:
120VAC: 6ft (1.8m) long with standard three-prong NEMA 5-15 plug
240VAC: 6ft (1.8m) long with standard three-prong NEMA 6-15 plug

System Includes:
• TTH Tote Tank Silicone Rubber Heating Pad: Installs underneath bladder.
• TTD Outdoor-Use Digital On/Off Temperature Controller: Mounts easily to cage.
* 240VAC model has twice the wattage as the 120VAC model and is strongly recommended for applications that involve heat-up and melting due to the higher wattage output.

 

https://morelectricheating.com/products/MANUFACTURERS/BRISKHEAT/TTH.aspx

New product on our website: Chromalox RAD Single Element Radiant Heater – RAD

New product on our website: Chromalox RAD Single Element Radiant Heater – RAD

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CHROMALOX%20AIR%20AND%20INFRARED/METAL%20SHEATHED%20RADIANT%20HEATERS/RAD.aspx

RAD Single Element Radiant Heater – RAD
• 1500°F Max. Sheath Temp.
• 1.83 kW/ft²
• 0.4 – 4.5 kW
• 120, 208, 240, 275, AND 480 Volt
• 3/8 in. Dia. INCOLOY™ Sheath Elements (Type RTU)

• Finish Curing
• Latex and Resin Curing
• Plastics Processing
• Ink Drying
• Textile and Non-Woven Fabric Manufacturing
• Paper and paperboard Manufacturing
• Food Processing
• Ceramic Drying

• Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.

• Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

New product on our website: Chromalox U-RAD Single Hairpin Element Radiant Heater

New product on our website: Chromalox U-RAD Single Hairpin Element Radiant Heater

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CHROMALOX%20AIR%20AND%20INFRARED/METAL%20SHEATHED%20RADIANT%20HEATERS/U-RAD.aspx

U-RAD Single Hairpin Element Radiant Heater
• 3.66 kW/Ft²
• 0.8 – 3.6 kW
• 120, 208, 240, 275 and 480 Volt
• 3/8″ Dia. INCOLOY® Sheath Elements (type UTU)
• 1500°F Max. Sheath Temp.

• Roll Heating
• Shrink Fitting
• Preheat Glass for Polishing, Drying,
• Fast-Moving Webs and other applications where High Temperatures will not damage materials

• Complete, ready-to-Connect assembly with adjustable terminal housing, which permits easy interchange of elements to accommodate work of varying dimensions.

• Movable mounting clamps and bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

• Process Temperature Control — Radiant heater output may be controlled with Etirex SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. See the Controls section of this catalog.

New product on our website: Chromalox UTU-LT 3/8″ Dia. Heart Cross-Section – UTU-LT

New product on our website: Chromalox UTU-LT 3/8″ Dia. Heart Cross-Section – UTU-LT

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/TUBULAR/UTU-LT.aspx

UTU-LT 3/8″ Dia. Heart Cross-Section – UTU-LT
• Component of Radiant Heater (type U-RAD-LT)

Tubular heating elements perform exceptional industrial heat transfer by conduction, convection, or radiation to heat liquids, air, gases, and surfaces. In most commercial heater assemblies, tubular element design configurations vary: round, triangular, flat press, and formed. Bends are made to customer requirements: custom built from 0.200″ to 0.475″ diameters, a multitude of sheath materials with sheath temperature capabilities up to 1600°F, and watt densities to fit many applications up to 600 volts. Available with over 20 optional terminations and many stocked accessories.

• Type 8 Terminals — Standard with threaded clip to facilitate wiring.

• Liquid-Tight Fittings — Standard for installation ease.

• Work Temperatures — See Tubular Heaters Overview section.

• Bending — Lengthwise only. See Tubular Heater Overview section.

New product on our website: Chromalox WS 2-1/2″ Wide Strip Heaters

New product on our website: Chromalox WS 2-1/2″ Wide Strip Heaters

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/STRIP/WS.aspx

WS 2-1/2″ Wide Strip Heaters
• 8 – 25 W/In²
• Third-party certifications: UL Recognized, CSA, CE, VDE

Chromalox strip heaters are used principally for convection-type air heating and clamp-on installations.

New product on our website: Chromalox OTF Finstrip Air Heater

New product on our website: Chromalox OTF Finstrip Air Heater

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CHROMALOX%20AIR%20AND%20INFRARED/OTF.aspx

OTF Finstrip® Air Heater
• 1-1/2″ Strip with Fins 2″ Wide
• Third-party certifications: UL Recognized, CSA, DVE

• Mount across Air Stream within Forced Air Ducts
• Use in Dryers, Ovens and other Process Air Heating Equipment
• Comfort Heating in Ducts, Load Banks and Humidity Controls
• Many Air Blast and Convection requirements can be accommodated by the wide range of lengths, wattages and watt densities available.

• Durability is assured by rugged Chromalox strip heater with locked-on aluminized steel fins.

• Rapid Heat Transfer to air from large finned area.

• Large Selection of lengths, wattages and watt densities.

New product on our website: Chromalox MT-2 Series Screw Plug Immersion Heaters for Water – Clean

New product on our website: Chromalox MT-2 Series Screw Plug Immersion Heaters for Water – Clean

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/SCREWPLUG/MT-2.aspx

MT-2 Water – Clean
UL/CSA Certification
• 2″ NPT Brass Screw Plug
• Copper Sheath Elements
• High Watt Density (46 – 53 W/In²)
• 1.5 – 15 kW
• Without Thermostat
• 120, 208, 240 and 480 Volt, Single Phase
• General Purpose, Moisture Resistant/ Explosion Resistant Terminal Enclosure or Moisture Resistant
• Third-party certifications: UL Listed, CSA, cCSAus

Screw Plug Immersion heaters consist of hairpin bent tubular elements brazed or welded into a screw plug, and provided with terminal enclosures for electrical connections. Chromalox MT-2 industrial heaters use direct immersion for energy efficiency, and are well suited for clean water applications.

New product on our website: Chromalox NWHJR Circulation Heaters for Clean Water

New product on our website: Chromalox NWHJR Circulation Heaters for Clean Water

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/CIRCULATION/NWHJR.aspx

NWHJR
Clean Water
UL/CSA Certification
• Integral Thermostat (60 – 180°F)

Type NWHJR (Junior) can be used to supply hot water or boost water temperature anywhere in a water distribution system.

• Terminal Enclosure — E1 General Purpose is standard. E4 Moisture Resistant available.
• Elements — Seamless 0.315″ diameter copper sheath heating element brazed to a 1″ brass screw plug.
• Vessel — Available with galvanized steel or solid brass pipe body.

New product on our website: Chromalox HTRC Heat Transfer and Release Coating

New product on our website: Chromalox HTRC Heat Transfer and Release Coating

https://morelectricheating.com/default.aspx?page=item%20detail&itemcode=CHROM014293

Item Code: CHROM014293

Description:  HTRC Heat Transfer and Release Coating

Chromalox Part (PCN) #: 014293 – Chromalox Part # 074174001 – 4 oz. Jar – 1800 deg.F Max temp. – Enhances thermal transfer and helps to insert and remove the cartridge heater in the hole
Condition:  New in box
Vendor:

Chromalox
Quantity:

CHROM014293

New product on our website: Chromalox 1-112426 Radiant Heater Terminal Box

New product on our website: Chromalox 1-112426 Radiant Heater Terminal Box

https://morelectricheating.com/default.aspx?page=item%20detail&itemcode=CHROM148144

Item Code: CHROM148144

Description:  1-112426 Radiant Heater Terminal Box

Chromalox Part (PCN) #: 148144 – Chromalox 112426001 for use with two RTU elements when complete heaters are not required. Provide enclosure for making wiring connections and support for end of elements These are the end sections of complete heater.
Condition:  New in box
Vendor:

Chromalox
Quantity:

CHROM148144

New product on our website: Chromalox SN 3/4″ Wide Strip Heater

New product on our website: Chromalox SN 3/4″ Wide Strip Heater

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/STRIP/SN.aspx

SN 3/4″ Wide Strip Heater
• 7 – 11 W/In²
• Third-party certifications: UL Recognized, CSA, CE, VDE

Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. See guidelines in the Strip Heater Overview.

New product on our website: Chromalox SNH Series 1″ Wide Strip Heater

New product on our website: Chromalox SNH Series 1″ Wide Strip Heater

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/STRIP/SNH.aspx

SNH 1″ Wide Strip Heater
• 7 – 24 W/In²
• Third-party certifications: UL Recognized, CSA, CE, VDE

Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. See guidelines in the Strip Heater Overview.

New product on our website: Chromalox S Series 1-1/2″ Wide Strip Heater

New product on our website: Chromalox S Series 1-1/2″ Wide Strip Heater

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/STRIP/S.aspx

S 1-1/2″ Wide Strip Heater – S
• 6 – 21 W/In²
• Third-party certifications: UL Recognized, CSA, CE, VDE

Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. See guidelines in the Strip Heater Overview.

New product on our website: Chromalox MTO-2 Oil – Heavy Weight Screw Plug Immersion heaters

New product on our website: Chromalox MTO-2 Oil – Heavy Weight Screw Plug Immersion heaters

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/SCREWPLUG/MTO-2.aspx

MTO-2 Oil – Heavy Weight Screw Plug Immersion heaters
• UL/CSA Certification
• 2″ NPT Steel Screw Plug
• Steel Sheath Elements
• 6 – 8 W/In²
• 0.5 – 3 kW
• Without Thermostat
• 120, 208, 240 and 480 Volt, 1 & 3 Phase
• General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure or Moisture Resistant
• Third-party certifications: UL Recognized, CSA, cCSAus

Screw Plug Immersion heaters consist of hairpin bent tubular elements brazed or welded into a screw plug, and provided with terminal enclosures for electrical connections. Chromalox MTO-2-H industrial heaters use direct immersion for energy efficiency, and are well suited for heavy weight oil applications.

New product on our website: Chromalox ARTM Water – Clean Screw Plug Immersion heaters

New product on our website: Chromalox ARTM Water – Clean Screw Plug Immersion heaters

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/SCREWPLUG/ARTM.aspx

https://morelectricheating.com/products/MANUFACTURERS/CHROMALOX/SCREWPLUG/ARTM.aspx