New Product Introduction: BriskHeat SLCAB Self-Regulating Heating Cable for pipe tracing, freeze protection, and low temperature process maintenance applications up to 150°F

BriskHeat SLCAB Self-Regulating Heating Cable for pipe tracing, freeze protection, and low temperature process maintenance applications up to 150°F

https://morelectricheating.com/products/MANUFACTURERS/BRISKHEAT/SLCAB%20SELF-REGULATING%20HEATING%20CABLE.aspx

SLCAB Self-Regulating Heating Cable

Ideal for pipe tracing, freeze protection, and low temperature process maintenance applications up to 150°F (66°C)
Self-limiting: Automatically adjusts heat output based on surface temperature
Safe to overlap and insulate
Can be cut-to-length and terminated in the field
No temperature controller is required*

* If a specific process temperature is needed, a temperature controller is required.

Specifications

Continuous maintenance temperature: 150°F (66°C) maximum
Intermittent exposure temperature: 185°F (85°C) maximum; -20°F (-29°C) minimum
3, 5, 8, or 10 watts/ft (10, 16, 26, or 33 watts/m)
Supply voltages: 110 – 120VAC or 208 – 277VAC
Moisture, chemical, and flame resistant
16AWG bus wires
Braid resistance:
Tinned copper: 0.003 ohms/ft (0.009 ohms/m)
Stainless steel: 0.125 ohms/ft (0.410 ohms/m)
T-Rating**
-T6: 3, 5, and 8 watts/ft (10, 16, and 26 watts/m)
-T5: 10 watts/ft (33 watts/m)
** Electrical equipment T-rating codes define the maximum surface temperature that equipment will reach. It is used in hazardous (classified) area applications.